Lexmark X940E, X945E manual Printing in black and white, Using Max Speed and Max Yield, 105

Printing in black and white

To print all text and graphics using only the black toner cartridge, set the printer to Black Only.

Note: The printer driver is capable of overriding this setting.

1Make sure the printer is on and Ready appears.

2On the home screen, touch .

3Touch Settings.

4Touch repeatedly until Quality Menu appears.

5Touch repeatedly until Print Mode appears.

6Touch repeatedly until Black Only appears.

7Touch Black Only.

Using Max Speed and Max Yield

The Max Speed and Max Yield settings allow you to choose between a faster print speed or a higher toner yield. Max Speed is the factory default setting.

•Max Speed—Prints in a black only mode until it receives a page with color content. Then, it prints in color and does not switch to black only until it receives ten consecutive black-and-white pages.

•Max Yield—Switches from black to color mode based on the color content found on each page. Frequent color mode switching can result in slower printing if the content of pages is mixed.

To specify the setting:

1Open a Web browser.

2In the address bar, type the network printer or print server IP address, and then press Enter.

3Click Configuration.

4Click Print Settings.

5Click Setup Menu.

6From the Printer Usage list, select Max Speed or Max Yield.

7Click Submit.

105