Lexmark X945E, X940E manual 144

Menu item	Description
Enable Manual Fax	Sets the printer to fax manually only, which requires a line splitter and a
On	telephone hand set
Off	Notes:
	•	Use a regular telephone to answer an incoming fax job and to dial a fax
		number.
	• Touch # 0 on the numeric keypad to go directly to the Manual Fax function.
Memory Use	Defines the amount of non-volatile memory used in relation to fax for a fax job
All receive	Notes:
Mostly receive
	•	“All receive” specifies that all the memory is set to receive fax jobs.
Equal
	• “Mostly receive” specifies that most of the memory is set to receive fax jobs.
Mostly sent
	•	Equal is the factory default setting. Equal splits the memory for sending
All send
		and receiving fax jobs into equal amounts.
	•	“Mostly sent” specifies that most of the memory is set to send fax jobs.
	•	“All send” specifies that all the memory is set to send fax jobs.
Cancel Faxes	Specifies whether the printer may cancel fax jobs
Allow	Note: If Cancel Faxes is not enabled, it will not appear as an option.
Don't Allow
Fax number masking	Specifies the direction from which digits are masked in an outgoing fax number
Off	Note: The number of characters masked is determined by the “Digits to mask”
From left	setting.
From right
Digits to mask	Specifies the number of digits to mask in an outgoing fax number
0–58

144