Lexmark X940E, X945E Changing a Custom Type <x> name, Assigning a custom paper type name

Changing a Custom Type <x> name
You can use the Embedded Web Server or MarkVisionTM to define a name other than Custom Type <x> for each
of the custom paper types that are loaded. When a Custom Type <x> name is changed, the menus display the new
name instead of Custom Type <x>.
To change a Custom Type <x> name from the Embedded Web Server:
1Open a Web browser.
Note: The computer must be connected to the same network as the printer.
2In the address bar, type the IP address of the network printer (for example,192.264.263.17).
3Press Enter.
4From the navigation panel of the initial page, click Configuration.
5Click Paper Menu.
6Click Custom Name.
7Type a name for the paper type in a Custom Name <x> box.
Note: This custom name will replace a custom type <x> name under the Custom Types and Paper Size/Type
menus.
8Click Submit.
Submitting Selection appears.
9Click Custom Types.
Custom Types appears, followed by your custom name.
10 Select a Paper Type setting from the picklist next to your custom name.
11 Click Submit.
Submitting Selection appears.
Assigning a custom paper type name
Assign a custom paper type name to a tray when linking or unlinking the tray.
1Make sure the printer is on and Ready appears.
2From the control panel, touch .
3Touch Paper Menu.
4Touch Paper Size/Type.
5Touch the tray number or MP Feeder Type.
6Touch repeatedly until Custom Type <x> or another custom name appears.
7Touch Submit.
42