Lexmark X940E, X945E manual Setup menu, 167

Menu item	Description
Job Acct Stat	Prints a list of all stored job statistics or deletes the information from the printer
Print	hard disk
Clear	Notes:
	•	A printer hard disk must be installed in the printer and operating properly
		for this menu item to be available.
	•	Selecting Print prints a list of statistics.
	•	Clear deletes all job statistics stored on the printer hard disk. Clearing
		job account statistics appears on the display.
	•	The Clear selection will not appear if Job Accounting is set to
		MarkTrackTM.
Activate Hex Trace	Assists in isolating the source of a print job problem
<none>	Notes:
	•	When Hex Trace is activated, all data sent to the printer is printed in
		hexadecimal and character representation and control codes are not
		executed.
	•	To exit Hex Trace, turn the printer off, or reset the printer.
Coverage Estimator	Provides an estimate of the percentage coverage of cyan, magenta, yellow,
Off	and black on a page. The estimate is printed on a separator page.
On	Note: Off is the factory default setting.
Setup menu
Menu item	Description
Printer Language	Specifies the printer language used to communicate data from the computer
PS Emulation	to the printer
PCL Emulation	Notes:
	• PCL emulation uses a PCL interpreter for processing print jobs. PostScript
		emulation uses a PS interpreter for processing print jobs. PPDS emulation
		uses a PPDS interpreter for processing print jobs.
	• The factory default printer language varies depending on the type of printer
		purchased.
	• Setting a printer language as the default does not prevent a program from
		sending print jobs that use another printer language.
Resource Save	Specifies how the printer handles temporary downloads, such as fonts and
Off	macros stored in RAM, when the printer receives a job that requires more
	memory than is available
On
	Notes:
	• Off is the factory default setting. Off sets the printer to retain the downloads
		only until memory is needed. Downloads are deleted in order to process
		print jobs.
	• The On setting retains the downloads during language changes and printer
		resets. If the printer runs out of memory, 38 Memory Full appears, and
		downloads are not deleted.

167