Lexmark X945E, X940E manual Restoring Factory Defaults, 196

Restoring Factory Defaults

Wait for the message to clear.

When factory default settings are restored:

•All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets.

•All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom settings in the Serial <x>, Network, Infrared, LocalTalk, USB, and Fax menus.

Restoring Held Job(s) x/y

•Wait for the message to clear.

•Touch Quit restoring to delete unrestored held jobs.

Note: x represents the number of jobs being restored. y represents the total number of jobs to be restored.

Scan Document Too Long

The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message.

Scanner ADF Cover Open

The ADF cover is open. The message clears when the cover is closed.

Sending page <n>

The printer sends page <n> of the fax job, where <n> is the number of the page sent. Wait for the message to clear.

Note:

Serial <x>

The printer is using a serial cable connection. The serial port is the active communication link.

Set clock

The clock is not set. This message appears if no other fax status message appears. It remains until the clock is set.

Some held jobs were not restored

Touch Continue to delete the specified job.

Note: Some held jobs are not restored. They stay on the hard disk and are inaccessible.

Some held jobs will not be restored

•Touch Continue to clear the message and continue printing.

•Cancel the current job.

Standard Bin Full

Remove the stack of paper from the standard exit bin to clear the message.

Staples <x> empty or misfed

Load the specified staple cartridge into the finisher to clear the message and continue stapling.

Staples <x> low or missing

Load the specified staple cartridge in the finisher to clear the message.

196