HP 6200 PRO QN084AW#ABA, 6200 Pro H3D90USABA manual If the error persists, update to the latest

Table C-1Numeric Codes and Text Messages (continued)

Control panel message	Description	Recommended action
2204-Inventory error during MEBx execution	BIOS information passed to the MEBx	1.	Reboot the computer.
	resulted in a failure.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2205-Interface error during MEBx execution	MEBx operation experienced a hardware	1.	Reboot the computer.
	error during communication with ME.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2211-Memory not configured correctly for	DIMM1 or XMM1 is not installed.	Make sure there is a memory module in the
proper MEBx execution.		black DIMM1 socket and that it is properly
		seated.

2212-USB Key Provisioning failure writing to device

USB device used for USB key provisioning	1.	Try a different USB key device for
will not allow BIOS to update provision file		provisioning.
properly.	2.	If the error persists, update to the latest
		BIOS version and ME firmware version.
	3.	If the error still persists, replace the
		system board.

2217-ME Firmware Version request failure	ME firmware is not properly responding to	1.	Reboot the computer.
	BIOS query for version information.	2.	If the error persists, update to the latest
			BIOS version and ME firmware version.
		3.	If the error still persists, replace the
			system board.

2218-ME Firmware Version should be updated

ME firmware must be updated to match current functionality contained in the system BIOS.

1.Update to the latest ME firmware version.

2.If the error persists and system BIOS has been recently updated, restore previous system BIOS version.

3.If the error still persists, replace the system board.

2219-USB Key Provisioning file has invalid header identifier

Provisioning file contained on the USB key has been corrupted or is not a valid version for the current ME firmware.

1.Recreate the provisioning file using third party management console software.

2.If the error persists and system BIOS has been recently updated, restore previous system BIOS version. Otherwise, update the ME firmware version.

3.If the error still persists, replace the system board.

POST Numeric Codes and Text Messages 257