HP 6200 Pro A2W44UT#ABA, 6200 Pro H3D90USABA manual Changing from Desktop to Tower Configuration

Changing from Desktop to Tower Configuration

1.Prepare the computer for disassembly (Preparation for Disassembly on page 210).

2.Orient the computer so that its left side is facing down and place the computer firmly down into the stand.

Figure 9-34Placing the computer on the stand

3.Reconnect the external equipment, plug the power cord into a power outlet, and turn the computer on.

4.Lock any security devices that were disengaged when the computer cover or access panel was removed.

To change from the tower configuration to the desktop configuration, reverse the previous steps.

NOTE: An optional Quick Release mounting bracket is available from HP for mounting the computer to a wall, desk, or swing arm.

242 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis