HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA manual

8.Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and attach the thermal sensor to the top of the hard drive with the adhesive strip (2).

Figure 6-37Replacing the Thermal Sensor

9.Slide the cover on the carrier (1) and replace the screw on the rear of the carrier to secure the cover in place (2).

Figure 6-38Replacing the Carrier Cover

10.Slide the hard drive carrier into the enclosure on the computer and lock it with the key provided.

NOTE: The carrier must be locked for power to be supplied to the hard drive.

108 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis