HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA manual

6.Place the new hard drive in the carrier then slide the hard drive back so that it seats in the SATA connector on the carrier's circuit board. Be sure the connector on the hard drive is pressed all the way into the connector on the carrier's circuit board.

Figure 6-35Replacing the Hard Drive

7.Replace the four screws in the bottom of the carrier to hold the drive securely in place. Figure 6-36Replacing the Security Screws

Drives 107