HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA manual Post Numeric Codes and Text Messages

POST Numeric Codes and Text Messages

This section covers those POST errors that have numeric codes associated with them. The section also includes some text messages that may be encountered during POST.

NOTE: The computer will beep once after a POST text message is displayed on the screen.

Table C-1Numeric Codes and Text Messages

Control panel message	Description	Recommended action
101-Option ROM Checksum Error	System ROM or expansion board option	1.	Verify the correct ROM.
	ROM checksum.	2.	Flash the ROM if needed.
		3.	If an expansion board was recently
			added, remove it to see if the problem
			remains.
		4.	Clear CMOS. (See Appendix B,
			Password Security and Resetting CMOS
			on page 307.)
		5.	If the message disappears, there may
			be a problem with the expansion card.
		6.	Replace the system board.
103-System Board Failure	DMA or timers.	1.	Clear CMOS. (See Appendix B,
			Password Security and Resetting CMOS
			on page 307.)
		2.	Remove expansion boards.
		3.	Replace the system board.

110-Out of Memory Space for Option ROMs Recently added PCI expansion card contains an option ROM too large to download during POST.

1.If a PCI expansion card was recently added, remove it to see if the problem remains.

2.In Computer Setup, set Advanced > Device Options > NIC PXE Option ROM Download to DISABLE to prevent PXE option ROM for the internal NIC from being downloaded during POST to free more memory for an expansion card's option ROM. Internal PXE option ROM is used for booting from the NIC to a PXE server.

POST Numeric Codes and Text Messages 251