HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA manual

b.Press the tab on right side of the panel (1), and then swing the right side of the cage away from the chassis to remove it (2).

Figure 9-30Removing the I/O panel

12.Remove the three remaining screws (1) that secure the system board to the chassis.

13.Slide system board toward the front of the unit until the rear connectors are clear of their slots in the chassis (2).

14.Lift the rear of the system board until it clears the chassis, and then remove the system board from the chassis (3).

Figure 9-31Removing the system board

To install the system board, reverse the removal procedure.

System Board 239