HP 6200 PRO QN084AW#ABA, 6200 Pro H3D90USABA, 8200 A2W54UT#ABA Front I/O, Power Switch Assembly

Front I/O, Power Switch Assembly

Description	Spare part number
Front I/O and power switch assembly	636926-001

The front I/O and power switch/LEDs is one assembly, attached to the front of the chassis. Push the assembly into the chassis to remove.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 169).

2.Remove the access panel (Access Panel on page 170).

3.Remove the front bezel (Front Bezel on page 171).

4.Remove the chassis fan (Front Fan Assembly on page 194).

5.Rotate the drive cage to its upright position.

6.Disconnect the four cables from the system board as follows:

●Yellow connector labeled FRONT USB

●Green connector labeled FRONT USB2

●Blue connector labeled FRONT AUD

●Black connector labeled PB/LED

Figure 8-31Disconnecting the front I/O, power switch/LED assembly cables

7.Remove the screw (1) that secures the assembly to the front of the chassis.

Front I/O, Power Switch Assembly 197