HP 6200 Pro A2W44UT#ABA, 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 8200 A2W54UT#ABA manual

6.Carefully lift the processor from the socket (3).

CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling them could cause irreparable damage. Once pins are damaged it may be necessary to replace the system board.

The heat sink must be installed within 24 hours of installing the processor to prevent damage to the processor’s solder connections.

Figure 9-25Removing the processor

To install a new processor:

1.Place the processor in its socket and close the retainer.

234 Chapter 9 Removal and Replacement Procedures – Ultra-Slim Desktop (USDT) Chassis