HP 6200 PRO QN084AW#ABA, 6200 Pro H3D90USABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA manual

CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover for proper cooling of internal components during operation.

8.To install a new expansion card, slide the bracket on the end of the card down into the slot on the back of the chassis and press the card down firmly into the socket on the system board.

Figure 6-12Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot.

9.Close the expansion card retention latch, making sure that it snaps firmly into place.

10.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

11.Replace the computer access panel.

12.Reconnect the power cord and turn on the computer.

13.Lock any security devices that were disengaged when the computer access panel was removed.

14.Reconfigure the computer, if necessary.

Expansion Card 89