HP 6200 Pro A2W44UT#ABA, 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA manual Front I/O, USB Assembly

Front I/O, USB Assembly

Description	Spare part number
Front I/O and USB assembly	646821-001

The front I/O, USB assembly is mounted to the front of the chassis and is removed by pulling it away from the chassis.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 76).

2.Remove the computer access panel (Computer Access Panel on page 77).

3.Remove the front bezel (Front Bezel on page 78).

4.Disconnect the three cables from the following system board connectors:

●Yellow connector labeled FRONT USB

●Green connector labeled FRONT USB2

●Blue connector labeled FRONT AUD

NOTE: The blue FRONT AUD connector is not located near the other two connectors used for the front I/O assembly. See the following image for its location.

110 Chapter 6 Removal and Replacement Procedures – Convertible Minitower (CMT) Chassis