HP 6200 Pro H3D90USABA, 8200 A2W54UT#ABA USB Security, Slot Security, Network Boot, System IDs

Table 2-4Computer Setup—Security (continued)

USB Security	Allows you to set Enabled/Disabled (default is Enabled) for:
	●	Front USB Ports
		◦	USB Port 1
		◦	USB Port 2
		◦	USB Port 3
		◦	USB Port 4
	●	Rear USB Ports
		◦	USB Port 1
		◦	USB Port 2
		◦	USB Port 3
		◦	USB Port 4
		◦	USB Port 5
		◦	USB Port 6
	●	Accessory USB Ports
		◦	USB Port 1
		◦	USB Port 2 (some models)
		◦	USB Port 3 (some models)
		◦	USB Port 4 (some models)
Slot Security	Allows you to disable any PCI or PCI Express slot. Default is enabled.
Network Boot	Enables/disables the computer’s ability to boot from an operating system installed on a network
	server. (Feature available on NIC models only; the network controller must be either a PCI
	expansion card or embedded on the system board.) Default is enabled.
System IDs	Allows you to set:

●Asset tag (18-byte identifier), a property identification number assigned by the company to the computer.

●Ownership tag (80-byte identifier) displayed during POST.

●Chassis serial number or Universal Unique Identifier (UUID) number. The UUID can only be updated if the current chassis serial number is invalid. (These ID numbers are normally set in the factory and are used to uniquely identify the system.)

●Keyboard locale setting for System ID entry.

12 Chapter 2 Computer Setup (F10) Utility