HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA manual Drives

Drives

Description		Spare part number
16X SATA DVD±RW drive with LightScribe		581600-001
16X SATA DVD-ROM drive		581599-001
Blu-ray BD-RW SuperMulti DL Drive with LightScribe		617030-001
1 TB, 7200 rpm SATA hard drive		636930-001
750	GB, 7200 rpm SATA hard drive	632938-001
500	GB, 7200 rpm SATA hard drive	636929-001
320	GB, 7200 rpm SATA hard drive, 2.5-inch	634824-001
300	GB, 10000-RPM SATA3 hard drive	639695-001
300	GB, 10000-RPM SATA2 hard drive	648963-001
250	GB, 7200 rpm SATA hard drive	636927-001
160	GB, 10000-RPM SATA hard drive	639694-001
160	GB, 10000-RPM SATA hard drive, 2.5-inch	508312-001
160	GB Solid State Drive (SSD)	646809-001
80 GB Solid State Drive (SSD)		607817-001

When installing drives, follow these guidelines:

●The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0. If you are adding a second hard drive, connect it to the light blue connector (8200 Elite models) or the white connector (6200 Pro models) on the system board labeled SATA1.

●Connect the first SATA optical drive to the white SATA connector on the system board labeled SATA2. If you are adding a second optical drive connect it to the black SATA connector on the system board labeled ESATA. If the ESATA connector is already populated, connect the second optical drive to the light blue connector on the system board labeled SATA1 (8200 Elite models) or the white connector labeled SATA1 (6200 Pro models).

●Connect an optional eSATA adapter cable to the black SATA connector on the system board labeled ESATA.

●Connect a media card reader USB cable to the USB connector on the system board labeled

MEDIA.

●The power cable for the SATA optical drives is a two-headed cable this is plugged into the system board with the first connector routed to the top 5.25-inch bay and the second connector routed to the bottom 5.25-inch bay.

Drives 143