Hood Sensor

Description

Spare part number

 

 

Hood sensor

638816-001

 

 

The hood sensor is attached in a slot in the rear of the chassis.

1.Prepare the computer for disassembly (Preparation for Disassembly on page 169).

2.Remove the access panel (Access Panel on page 170).

3.Unplug the sensor cable from the system board connector labeled HSENSE (1).

4.Slide the hood sensor straight out of the notch in the chassis (2).

NOTE: A flat blade screwdriver can be used to push the hood sensor out of the slot.

Figure 8-30Removing the hood sensor from the chassis fan

To install the hood sensor, reverse the removal procedure.

196

Chapter 8 Removal and Replacement Procedures – Small Form Factor (SFF) Chassis

Page 208
Image 208
HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA manual Hood Sensor