HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA manual 8Removing an Expansion Slot Cover Expansion Cards

4.Release the slot cover retention latch that secures the PCI slot covers by lifting the green tab on the latch and rotating the latch to the open position.

Figure 7-7Opening the Expansion Slot Retainer

5.Before installing an expansion card, remove the expansion slot cover or the existing expansion card.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

a.If you are installing an expansion card in a vacant socket, remove the appropriate expansion slot cover on the back of the chassis. Pull the slot cover straight up then away from the inside of the chassis.

Figure 7-8Removing an Expansion Slot Cover

Expansion Cards 139