HP 6200 PRO QN084AW#ABA, 6200 Pro H3D90USABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA Hood Sensor

To install the TV tuner module or WLAN module, reverse the removal procedure. Make sure the antenna cable is correctly routed.

Hood Sensor

Description	Spare part number
Hood sensor	638816-001

1.Prepare the computer for disassembly (Preparation for Disassembly on page 210).

2.Remove the computer access panel (Access Panel on page 211).

3.Remove the optical drive (Removing the Optical Drive on page 220).

4.Unplug the hood sensor cable from the white system board connector labeled HSENSE (1) and remove the cable from the white clip mounted on the inside chassis wall.

5.Slide the hood sensor into the chassis to remove it from its slot (2). Disengaging the hood sensor from the chassis may require use of a screwdriver or similar tool.

Figure 9-28Removing the hood sensor

To install the hood sensor, reverse the removal procedures.

Hood Sensor 237