HP 6200 PRO QN084AW#ABA Select Advanced Device Options S5 Wake on, Select Start Control Panel

Table D-12Solving Network Problems (continued)

Wake-on-LAN feature is not functioning.

Cause	Solution
S5 Wake on LAN is disabled.	: Enable the S5 Wake on LAN option in Computer Setup.
	Select Advanced > Device Options > S5 Wake on
	LAN.
Wake-on-LAN is not enabled.	To enable Wake-on-LAN in Windows XP:
	1.	Select Start > Control Panel.
	2.	Double-clickNetwork Connections.
	3.	Double-clickLocal Area Connection.
	4.	Click Properties.
	5.	Click Configure.
	6.	Click the Power Management tab, then select the
		check box to Allow this device to bring the
		computer out of standby.
	To enable Wake-on-LAN in Windows Vista:
	1.	Select Start > Control Panel.
	2.	Under Network and Internet, select View
		network status and tasks.
	3.	In the Tasks list, select Manage network
		connections.
	4.	Double-clickLocal Area Connection.
	5.	Click the Properties button.
	6.	Click the Configure button.
	7.	Click the Power Management tab, then select the
		check box to Allow this device to wake the
		computer.
	To enable Wake-on-LAN in Windows 7:
	1.	Select Start > Control Panel.
	2.	Under Network and Internet, select View
		network status and tasks.
	3.	Click Local Area Connection.
	4.	Click the Properties button.
	5.	Click the Configure button.
	6.	Click the Power Management tab, then select the
		check box to Allow this device to wake the
		computer.

Solving Network Problems 293