HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA manual

Models: 6200 Pro A2W44UT#ABA 6200 Pro H3D90USABA 6200 PRO QN084AW#ABA 8200 A2W54UT#ABA

1 350
Download 350 pages 5.12 Kb
Page 180
Image 180

7.Remove the eight screws that secure the system board to the chassis. Figure 7-36System board screws

8.Slide the system board toward the front of the computer to disengage the I/O panel (1), lift the rear of the system board up at an angle (2), and then lift the system board out of the computer

(3).

Figure 7-37Removing the system board

When reinstalling the system board, first insert the I/O panel back into the slots in the rear of the chassis, and then align the board with the chassis screw holes.

NOTE: When replacing the system board, you must change the chassis serial number in the BIOS.

168

Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis

Page 180
Image 180
HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA, 8200 A2W54UT#ABA manual