HP 6200 PRO QN084AW#ABA manual Cannot format diskette Cause Solution, Storage Storage Options

Table D-3Solving Diskette Problems (continued)

Diskette drive cannot write to a diskette.

Cause	Solution
Writing to the wrong drive.	Check the drive letter in the path statement.
Not enough space is left on the diskette.	1. Use another diskette.
	2. Delete unneeded files from diskette.
Diskette is damaged.	Replace the damaged disk.
Cannot format diskette.
Cause	Solution
Invalid media reported.	When formatting a disk in MS-DOS, you may need to specify
	diskette capacity. For example, to format a 1.44-MB diskette,
	type the following command at the MS-DOS prompt:
	FORMAT A: /F:1440
Disk may be write-protected.	Open the locking device on the diskette.
Legacy diskette writes are disabled in Computer Setup.	Enter Computer Setup and enable Legacy Diskette Write
	in Storage > Storage Options.

A problem has occurred with a disk transaction.

Cause Solution

The directory structure is bad, or there is a problem with a file. In Microsoft Windows XP, right-click Start, click Explore, and select a drive. Select File > Properties > Tools. Under Error-checking, click Check Now.

In Microsoft Windows Vista or Windows 7, right-click Start, click Explore, and right-click on a drive. Select Properties then select the Tools tab. Under Error- checking click Check Now.

Diskette drive cannot read a diskette.

Cause	Solution
You are using the wrong diskette type for the drive type.	Check the type of drive that you are using and use the correct
	diskette type.
You are reading the wrong drive.	Check the drive letter in the path statement.
Diskette is damaged.	Replace the diskette with a new one.

Solving Diskette Problems 273