HP 8200 A2W54UT#ABA, 6200 Pro H3D90USABA Changing from a Minitower to a Desktop Configuration

Changing from a Minitower to a Desktop Configuration

1.Prepare the computer for disassembly (Preparation for Disassembly on page 76).

2.Remove the computer access panel (Computer Access Panel on page 77).

3.Remove the front bezel (Front Bezel on page 78).

4.Disconnect all power and data cables from the back of the drives in the 5.25-inch drive bays.

5.To release the drives from the 5.25-inch drive bay, lift the release tab on the green latch drive bracket for the drive (1). While lifting the release tab, slide the drive from its drive bay (2). Repeat this step for each 5.25-inch drive.

Figure 6-50Releasing the 5.25-inch Drives from the Drive Bays (Minitower)

Changing from a Minitower to a Desktop Configuration 123