HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA, 6200 Pro A2W44UT#ABA manual Power Switch/LED Assembly

Power Switch/LED Assembly

Description	Spare part number
Power switch/LED assembly	646828-001

1.Prepare the computer for disassembly (Preparation for Disassembly on page 76).

2.Remove the access panel (Computer Access Panel on page 129).

3.Remove the front bezel (Front Bezel on page 130).

4.Remove the front fan (Front Fan Assembly on page 153).

5.Disconnect the cable from the system board connector labeled PB/LED.

6.With the computer on its side, press on the tabs on the bottom of the assembly (1) to disengage the assembly from the chassis, and then rotate the bottom of the assembly upward (2) to remove it from the chassis.

Figure 7-30Removing the power switch/LED

7.Pull the assembly away from the chassis while threading the cable through the hole in front of the chassis.

156 Chapter 7 Removal and Replacement Procedures – Microtower (MT) Chassis