HP 6200 Pro H3D90USABA, 6200 PRO QN084AW#ABA manual Device, Configuration, Sata Defaults

Table 2-3Computer Setup—Storage (continued)

Device	Lists all installed BIOS-controlled storage devices.
Configuration	When a device is selected, detailed information and options are displayed. The following options
	may be presented:
	CD-ROM: Size, model, firmware version, serial number, connector color (not included for USB CD-
	ROM).
	Hard Disk: Size, model, firmware version, serial number, connector color.
	● SMART (ATA disks only)
	● Translation mode (ATA disks only)
	● Connector color(ATA disks only)
	Lets you select the translation mode to be used for the device. This enables the BIOS to access
	disks partitioned and formatted on other systems and may be necessary for users of older
	versions of UNIX (e.g., SCO UNIX version 3.2). Options are Automatic, Bit-Shift, LBA Assisted,
	User, and Off.
	Available only when the drive translation mode is set to User, allows you to specify the
	parameters (logical cylinders, heads, and sectors per track) used by the BIOS to translate disk
	I/O requests (from the operating system or an application) into terms the hard drive can
	accept. Logical cylinders may not exceed 1024. The number of heads may not exceed 256.
	The number of sectors per track may not exceed 63.
	CAUTION: Ordinarily, the translation mode selected automatically by the BIOS should not
	be changed. If the selected translation mode is not compatible with the translation mode that
	was active when the disk was partitioned and formatted, the data on the disk will be
	inaccessible.
	Diskette: Model and firmware version.
	NOTE: Displays for USB diskette drives.
	Default Values (ATA disks only)
	SATA Defaults
	See Translation Mode above for details.

8 Chapter 2 Computer Setup (F10) Utility