
Chapter 3: Server Installation
c.Specify a Country Code that fits your location.
d.Use the Routing field to set the FaxFinder’s operating mode. For POTS Mode, set the Routing field to “POTS Line.”
For PBX Routing Mode, set the Routing field to “DTMF Digits,” or, if a mode code for your PBX is listed in the
The "Avaya Mode Code" setting applies to Avaya PBXs in which a centralized
The "Siemens HiCom Mode Code" setting applies to the model 300H and other Siemens PBXs in which a centralized
The "Alcatel Mode Code" setting applies to the Alcatel model
e.Set the Max DTMF Digits field per the requirements of the PBX with which the FaxFinder will interface (if applicable).
f.Fax ID. The value entered in the “Fax ID” field will appear in the fax log printed by the sender’s fax machine and, typically, will be printed at the top of each page of the transmitted fax.
In PBX Routing Mode (where the Routing field is set to “DTMF Digits” or a ‘mode code’ option for a particular PBX brand), the Fax ID is typically the PBX fax extension number of the FaxFinder Administrator or the number of the phone line to which the FaxFinder is connected.
In POTS Mode (where the Routing field is set to “Pots Line”), the Fax ID is typically the number of the phone line to which the FaxFinder is connected.
In either mode, an organizational identifier, like the company name, might be used as the Fax ID instead of any fax number.
g.Smart Dial. When Smart Dial mode is ON, the FaxFinder will look for a dial tone before dialing. If, under normal circumstances, no dial tone is presented to the FaxFinder, then set Smart Dial to OFF.
FF110 FaxFinder Fax Server Admin User Guide | 28 |