Chapter 6: FaxFinder Client Software Operation
Sending a Fax
To send a fax by printing from an application program on a client PC, follow the steps listed below.
1.The FaxFinder client software must be installed on the PC. (See the section “Installing FaxFinder Client Software” earlier in this manual.)
2.The client PC and the FaxFinder server must both be connected to the same Ethernet LAN system. (See the section “Chapter 3, Part C: Configuring the FaxFinder Server” earlier in this manual.)
3.The association must be made between the client PC and the FaxFinder Server. (See the section “Associating Client with Specific FaxFinder Unit(s)” earlier in this manual).
4.After installation, the FaxFinder Fax Client Software program will be running whenever the PC is on. You can view the FaxFinder program's main window by clicking on the FaxFinder icon at the lower right of the PC’s monitor screen in its Application Tray. Then select “Show FaxFinder Client Software.”
Note: The user can shut down the FaxFinder program by selecting "exit" either from the tray icon or from the main FaxFinder program screen. If the program has been shut down, it can be restarted from the Windows Start menu.)
FF110 FaxFinder Fax Server Admin User Guide | 74 |
