Multi-Tech Systems FF110 guide

Chapter 5: FaxFinder Client Software Configuration

FaxFinder Fax Client Software Menu Command Definitions

Command Name	Values	Description

File menu commands
Send Fax	--	Brings up the FaxFinder Send Fax screen, the
		first step in transmitting a fax message via the
		FaxFinder system.
Pause Scheduler	--	When you invoke the Pause Scheduler
		command, any faxes currently pending will not
		be sent and any fax transmissions attempted
		while this command is in force will not be sent.
		When the scheduler has been paused, you must
		select Ê Pause Scheduler to rescind the
		command. That is to say, this command toggles
		on and off when selected repeatedly.
		If the computer is rebooted, the FaxFinder Fax
		Client Software will cancel the Pause Scheduler
		command at startup. Any faxes that had been
		paused and left unsent when the computer was
		turned off will be sent immediately when the
		computer is turned on again.
Options		Brings up the Options screen. The Options
		screen consists of the Identification tab where
		info about the client user should be entered and
		the Fax Retry tab where the client user can
		specify, for faxes that were not successfully on
		the first attempt, the number of subsequent
		attempts to be made and the interval between
		these attempts.
Exit		Closes the FaxFinder Fax Client Software
		program.

Multi-Tech Systems, Inc.

FF110 FaxFinder Fax Server Admin User Guide