Multi-Tech Systems FF110 manual FaxFinder Server Software Screens

		Chapter 4: FaxFinder Server Software Screens
“Modem Configuration: DID Modem” Screen Field Definitions (cont’d)
Field Name	Values	Description
Fax Debugging	on, off	This field allows you to turn on or off a fax
		debugging feature. When Fax Debugging is on,
		the FaxFinder produces detailed technical
		reports on failed faxes. Generally, this feature is
		for use by the user in conjunction with MultiTech
		tech support personnel. This feature helps to
		identify and clarify unusual or difficult problems
		that may occur.
Extra Init String		In this field, the administrator can enter AT
		commands that the FaxFinder modem will
		implement each time the modem is initialized
		(between each fax call).
DID Start	wink,	The “DID Start” value denotes the type of DID
	immediate,	line that the telco is providing. “Wink” is the most
	delay dial	common type of signaling for DID lines.
		Default = wink.
Error Correction	on, off	By setting Error Correction to "on," you are
		requesting that faxes be sent in an error-free
		condition, which can be achieved only if the
		remote fax machine with which you are
		communicating also supports Error Correction
		and has this feature enabled. The Error
		Correction feature slows down fax transmissions.
		If you are operating at speeds below 16,800 bps,
		you can set Error Correction "off" to achieve
		faster transmissions of faxes, although the
		quality of the fax transmissions may be
		compromised. However, if you have set the fax
		baud rate to 16,800 bps or higher, then error
		correction is automatically enabled.
		Default = on.
Update (button)	--	If you have changed the values of any fields on
		this screen, you must click Update to implement
		those changes.

Multi-Tech Systems, Inc. FF110 FaxFinder Fax Server Admin User Guide 51