Multi-Tech Systems FF110 manual Did Modem fields group

		Chapter 4: FaxFinder Server Software Screens
	Current Status Screen Field Definitions (cont’d)
Field Name	Values	Description
System fields group
Time Server	Initializing,	The FaxFinder synchronizes its fax time stamps
Status	No Errors,	to an Internet source, usually a government
	SNTP Error: type	standards site. It will attempt contact with the
		standards web site 5 times in 20 seconds. If
		contact fails, it will try 5 times again 5 minutes
		later. If contact succeeds, the FaxFinder will
		update its stamping time periodically per an
		interval set in the Administration screen.
Up Time	x days yy hours: zz minutes	Operation time since last reboot.
Email Status	No Errors,	Indicates whether the FaxFinder’s email
	Bad MailServer Address,	transmissions, both faxes and administrative
	Mail Server Connect Failed,	messages, are proceeding with or without errors.
	SMTP Invalid Response,
	SMTP Client Timeout
DID Modem fields group
State	Waiting for Ring,	Indicates the modem’s current operating
	Initializing Modem,	condition.
	Waiting for Connect,
	Negotiating, Receiving
	Page, Postpage Processing,
	Processing, Busied Out
Baud Rate	2400, 4800, 7200, 9600,	The data transmission speed in bits per second
	12000, 14400, 16800,	at which the current fax transmission is
	19200, 21600, 24000,	occurring.
	26400, 28800, 31200, 33600
	bps
Connect Time	mm/dd/yyyy,	For the current fax, the date and time at which
	hh:mm:ss	the connection began.
Phone Number	numeric	For inbound faxes received through the DID
		modem, this is the number that the remote fax
		sender dialed when sending the fax.
Page	numeric	For the current fax, this indicates the page
		number currently being received. “0” indicates
		that no fax is currently being sent or received.
Width	numeric, in pixels	Width of received fax.
Elapsed Time	numeric	The duration of the current fax transmission in
		seconds.
Name	alphanumeric	Name of person to whom the incoming fax will be
		routed.
Vertical	standard, fine	Horizontal resolution is 204 bpi. Vertical
Resolution		resolution can be either 98 bpi (standard) or 196
		bpi (fine).
Length	letter, legal, or variable	Length, in paper size, of the received fax.
Remote ID	numeric (phone number) or	The fax number or other identifier for the off-
	alphanumeric	premises fax machine that sent this fax.
Initialize		Initializes the DID modem, clearing a busied-out
Modem		state. This can only be done by a user with
(button)		administrative rights.
Make Busy		Imposes a busied state on the DID modem. This can
(button)		only be done by a user with administrative rights.

Multi-Tech Systems, Inc. FF110 FaxFinder Fax Server Admin User Guide 41