Chapter 7: Server Operation
Front Panel LEDs
Label |
| Name | Description |
Identifier |
|
| |
| General LEDs |
| |
|
| Power | On if unit is on. |
|
| Status | Flashing Green = unit is functioning properly |
|
|
| Solid Red = unit is having its software updated. DO NOT |
|
|
| TURN OFF if Status LED is solid red. |
|
|
| Off = system is booting |
| DID Fax LEDs |
| |
TD |
| Transmit Data | DID modem is transmitting data on phone line. |
RD |
| Receive Data | DID modem is receiving data on phone line. |
TR |
| Terminal Ready | When lit, DID modem is ready to receive a call. |
|
|
| Lit when DTR to DID modem is high. |
DID |
| DID | The telco central office is drawing power from the DID line |
|
|
| which means that a call is in progress. |
| PSTN Fax LEDs |
| |
TD |
| Transmit Data | The TD LED flashes when the POTS modem is transmitting |
|
|
| data to another modem. |
RD |
| Receive Data | The RD LED flashes when the POTS modem is receiving |
|
|
| data from another modem. |
TR |
| Terminal Ready | When lit, POTS modem is ready to make calls. |
|
|
| Lit when DTR to POTS modem is high. |
CD |
| Carrier Detect | Carrier of remote modem is detected. |
| Ethernet LEDs |
| |
ACT |
| Activity | Lit when packets are being transmitted by any device on the |
|
|
| Ethernet network (not necessarily by the FaxFinder). |
LINK |
| Data Link | Lit when a physical link has been established with the |
|
|
| Ethernet network. |
SPEED |
| Data Rate | Indicates speed of Ethernet connection. If lit, data rate is 100 |
|
|
| Mb/sec; if not lit, data rate is 10 Mb/sec. |
FF110 FaxFinder Fax Server Admin User Guide | 131 |