Muratec MFX-2830 manual Fax Functions

Before Transmitting

Transmission method settings (Memory transmission/Real time transmission)

There are two types of automatic transmissions. Memory transmission is when a transmission be- gins after the document is scanned, and real time transmission when a transmission begins while the document is being scanned. Memory transmission is set at the time of purchase, but when Memory transmission is set to OFF, one transmission can be specified for real time transmission.

●Real time transmission

Real time transmission directly transmits the document to the other faxmachine without scan- ning the document into memory. Transmission begins immediately after the transmission opera- tion is completed to allow you to confirm that the other machine has received the transmission.

●Memory transmission

Memory transmission transmits the document after scanning the document into memory. This allows you to take the document and leave without waiting for the transmission to end to save time. For Memory transmission, when the image is corrupted by line trouble, etc., the affected page is automatically resent.

Getting Started

COPY

Chapter1

COPY

Chapter2

Note

ON..... Memory Tx

OFF... Real time Tx

Note

Press RESET to cancel the settings.

In this case

1Press FAX.

2Press [Others].

3 (1) Press [ ] or [ ].

(2) Press [Memory Tx].

4(1) Press [ON] or [OFF].

(2) Press [Enter].

5(1) Press [Enter] again to return to the standby screen.

(2)Set the document and perform the transmission operation.

				COPY
				Chapter3
				FAX
				Chapter1
				FAX
Fax Functions				Chapter2
Select item to edit.				FAX
	2/2		Enter	Chapter3
F-Code Tx	OverseasTx Memory Tx		Dialing
OFF	OFF	ON	Options	FAX
DuplexScan Auto Rx
OFF	ON			Chapter4
				Common
Fax Functions				Settings

Select ON/OFF and select [Enter].

Memory Tx	2/2		Cancel		Enter	In This
					Enter
F-Code Tx	OverseasTx	Memory Tx		Dialing		Case...
OFF	ON		ON		Options
OFF	OFF
DuplexScan Auto Rx
OFF	ON

Appendix

Transmitting from the document glass will cause the memory to overflow.

Real time transmission is not possible from the document glass. Even if real time transmission is set, the machine will automatically switch to Memory transmission. The memory may overflow depending on the document. In this case, copy the document and send it by real time transmission using the ADF.

FAX Chapter1 ● Basic Fax Features 3-5