Muratec MFX-2830 manual Underlined items are the factory default

Device Management Settings

Function	Description	Setting
Copy Protect	Prohibits copies.	ON
	When turned ON, the display will not switch to the copy screen even if	OFF
	COPY is pressed.
	Fax & copy mode will not be possible.
Department	You can limit who uses the machine for sending faxes and making cop-	See “Managing Operating
Management	ies by requiring input of a department code.	Conditions by Depart-
		ment”. (see page 4-12)
Cost Management	You can register the charge data for collecting copying and faxing	Refer to “Managing Op-
	charges per department.	erating Conditions by De-
		partment” on page 4-12.
Security	This stores and does not print documents received after security recep-	Refer to “Preventing Re-
Reception	tion starting time.	ceived Documents from
	This function makes it possible to store in memory faxes received at	Being Read by Others
	night, for example, when no one is in the office. The received faxes can	(Security Reception)” on
	be printed later.	page 3-88.
Jobs Waiting to	The number of out-of-paper receptions and copies waiting to be printed	Refer to “Checking Copy
Print	is displayed.	Print Queue” on page
		2-26.
		Refer to “Checking the
		out-of-paper reception
		copy print queue”on page
		3-49.
Print Mask	This adjusts the size of the margin around the paper.	0.04 to 0.16 inches: 0.12
		inch
PIN Mode	When turned ON if required to enter the PIN (personal identification	Refer to “Masking the
	number) for making a long distance call, the PIN will not appear in a	PIN” on page 3-142.
	journal, error message printout or a transmit confirmation report.

Note

Underlined items are the factory default.

Getting Started

COPY

Chapter1

COPY

Chapter2

COPY

Chapter3

FAX

Chapter1

FAX

Chapter2

FAX

Chapter3

FAX

Chapter4

Common Settings

In This

Case...

Appendix

Common Settings for Copy and Fax ● Function Settings 4-37