Performing F-Code Communications

Functions used with F-code communications

Utilizing sub-addresses and passwords enables you to use the following functions.

F-code security box communications

When the other party for communications has an F-code security box set, F-code security communications can be performed by specifying the sub-address and the password (if necessary) for that box.

Unless the receiver of the security box communication inputs a specific I.D. code, the received document cannot be printed out, which is essential for sending highly confidential documents.

Reference

· F-code security box transmissions

Transmissions using sub-addresses (see page 3-116)

· Receiving F-code security box communications ...

Printing stored documents (see page 3-122)

F-code bulletin box communications

When the other party for communications has an F-code bulletin box set, documents can be sent to the bulletin box. The stored documents in the bulletin box can be retrieved (polling) by specifying the sub-address of that box. (Password specified as necessary)

Reference

· Sending documents to another party’s bulletin box

Transmissions using sub-addresses (see page 3-116)

· Retrieving documents stored in another party’s bulletin box ...

Reception using sub-addresses (see page 3-118)

· Storing documents in your bulletin box

Storing documents in bulletin boxes (see page 3-120)

F-code relay command communications

When an F-code relay box has been set in a relay machine, specifying the sub-address of that box can perform relay command communications. (Password specified as necessary)

At the relay machine, specified documents are sent (distributed) to the receiving party (distribution destina- tion) registered in the box.

Reference

· Transmitting relay commands

Perform F-code transmissions after first checking the sub-address of

 

and password to the relay command communications box that are set

 

in the other fax machine. (see page 3-116)

· When this machine is used as the relay machine ...

Set the relay box by registering F-code boxes (see page 3-100).

Getting Started

COPY

Chapter1

COPY

Chapter2

COPY

Chapter3

FAX

Chapter1

FAX

Chapter2

FAX

Chapter3

FAX

Chapter4

Common Settings

In This

Case...

Appendix

FAX Chapter2 Advanced Fax Features

3-99

Page 277
Image 277
Muratec MFX-2830 manual Functions used with F-code communications, Performing F-Code Communications