Muratec MFX-2830 Other settings list, Printing copy settings list

Copy Functions Settings

Other settings list

Function	Description	Setting
Separator line width	The width of the printed separator line can be set	0.01" to 0.05" : 0.01"
	when setting the separator line for combine copy or
	repeat.
Last job hold time	This sets the length of time for which the previously	0 to 600 min: 0 min
	copied job is stored in memory. Setting the setting to
	0 minute will prevent a document from being stored
	in memory and prohibit this feature.
Scan compression mode	The scanned image can be compressed and stored	NORMAL, HIGH
	in memory. More document sheets can be stored in
	memory by setting the image compression mode to
	HIGH. (This slows down the scan speed.)
Copy reservation	The next document can be scanned while the current	ON, OFF
	document is being copied. Setting this to [OFF] will
	prohibit scanning of the next document.

*Underlined items are initial settings at shipment.

Getting Started

COPY

Chapter1

COPY

Chapter2

COPY

Chapter3

FAX

					Chapter1
Printing copy settings list					FAX
					Chapter2
This prints a list showing the settings status of the copy settings.					FAX
1 Press LIST.
					Chapter3
					FAX
					Chapter4
					Common
					Settings
2					In This
	Press [Settings List].	List			Case...
		Select item to edit.
					Enter
					Appendix
		Speed Dial	Group	Journal	Settings
				List	List
		Other
		Lists

COPY Chapter3 ● Advanced Copy Settings 2-97