Getting
Started
Loading paper into bypass trayUse the bypass tray to print on plain paper, postcards, envelopes, OHP film and label sheets. The loaded paper will be printed on the downward side.
Reference
·When loading anything other than plain paper, the paper type must be set. (see page
Note
·Load the paper so that it does not go higher than the ▼ mark.
·Align the guide plate firmly against the edge of the paper.
1Open the bypass tray.
●When loading paper that is larger than the bypass tray, open the ex- tension tray.
2Align the guide plate to the pa- per size, face the printing surface downward, and load the paper by inserting its edge all the way to the back.
Bypass
tray
Extension tray
Extension tray
Guide plate