Muratec MFX-2830 manual Pin

In This

Case...

Error message	Countermeasure	Reference page
Invalid number!	A non-number character was pressed when selecting a recipient
	using the speed-dial or the group dial function. Use the numeric
	keypad to enter the correct number.
	The PIN for registering a secure number or performing security	3-102
	reception has been entered incorrectly. Enter the correct 4-digit
	PIN.
	The department code is wrong. Enter the correct department code.	4-14
Load paper into the XX cassette	The paper for reception is not set. This is displayed when paper	1-29
	that has been set as other than plain paper is loaded in the cas-
*XXX shows the cassette type such as 1st,	sette. The received document cannot be printed on this type of pa-
2nd, 3rd or 4th.	per.
Memory Overflow	The memory became full during a document scan, so the scanning	3-5
	process automatically stopped.
	Select real-time transmission and retry.
Memory overflow Rx	The memory overflowed during reception. Wait for the memory to	3-28
	come available or delete unnecessary documents.
No command stored	FAX CANCEL/JOB CONFIRM was pressed even though no reserva-	3-28
	tions have been made.
No command stored	Instructed to print the commands list even though no transmis-	3-34
	sions have been reserved.
No Document!	No document in the F-Code box.	3-126
	· Check the F-Code reception information.
	· Print out the F-Code document list and check to see if there is a
	document.
No protect passcode	The passcode is needed to use the security functions, but none has	4-36
	been set. Re-enter the passcode.
No report	Instructed to print a journal report even though no transmissions
	have been made.
No report	No fax transmission history in the report screen.	3-33
No reserved document	The number selected for printing a reserved transmission has	3-38
	been reserved for real-time transmission or polling.
Not enough memory	In manual reception, memory has overflowed while receiving. Wait	3-28
	until the memory becomes free, or delete the unnecessary docu-
	ments.
Not registered	Receiving number has not been registered in the one-touch and	3-172
	speed-dial. Check the one-touch or speed-dial lists, and operate
	again.
	Attempting to output an empty list. Register and operate again.
Only one location can be input	More than one location was set for the recipient using the numeric	3-80
	keypad when registering a fax forwarding condition. Only one lo-
	cation may be set for a recipient using the numeric keypad when
	registering a fax forwarding condition.
Phone is hang up	The receiver is off the hook. Return the receiver.
PIN is not stored	When the PIN entry is required, it has not been entered. Enter the	3-142
	PIN.

5-30In This Case... ● Maintenance and Troubleshooting