Getting

Started

How to load document

Make sure to dry correction fluid, ink and stamped areas completely before loading the document.

When loading the document in the ADF

(1)Place the surface to be copied or transmitted upward and load it all the way to the back on the left side of the machine. (The loaded document will be copied or transmitted from the top of the stack.)

(2)Align the document guide with the document width.

(3)Carefully adjust it until it touches the edge of the document.

Face the surface of the document to be copied or transmitted upward.

1-42Getting Started

Page 60
Image 60
Muratec MFX-2830 manual How to load document