Maintenance
A dirty document feeder roller will not only make the document dirty, but also cause black lines or other unwanted markings printed in copies or the received document by receiving party. It can also cause document jams.
Important
Do not use benzene or thinner as cleaning agents which could damage plastic and paint.
Getting Started
Note
·Wipe down the whole roller, turning it with one hand. (Some rollers do not turn.)
·When the dirt is heavy, wipe them with a cloth dipped in a small quantity of a mild cleaning solution, and then wipe them again with a cloth dipped in wa- ter and thoroughly wrung out.
Note
·Wipe down the whole roller, turning it with one hand.
·When the dirt is heavy, wipe them with a cloth dipped in a small quantity of a mild cleaning solution, and then wipe them again with a cloth dipped in water and thoroughly wrung out.
1Lift the ADF cover release lever (A1) to open the ADF cover.
2Clean the document feeder roller.
(1)Dip a soft cloth in water and wring it out thoroughly before wiping the roller.
(2)Open the inside cover (A2). Dip a soft cloth in water and wring it out thoroughly before wiping the roller.
3Close the ADF cover.
(1)Close the inside cover.
(2)Close the ADF cover.
ADF cover
release lever (A1)
Inside cover
(2)
(1)
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common Settings
In This
Case...
Appendix
In This Case... ● Maintenance and Troubleshooting | |
|
|