FAX

Chapter3

Blocking Junk Faxes

You can block junk faxes several ways, such as only allowing faxes to be received from numbers registered in one-touch key or speed-dial or by setting the machine to block faxes from designated numbers.

Operating tips

There are 3 ways to block junk faxes.

Mode 1:

This method sets the machine to receive faxes only from contacts registered in one-touch key

 

and speed-dial. The last four digits of the registered fax number are checked against the con-

 

tact’s ID, and the fax will only be received if they match.

Mode 2:

This method requires you to register specific junk fax numbers, and then the machine blocks

 

any faxes from those numbers. The final four to eight digits of the applicable fax numbers are

 

registered. Up to 50 contacts (fax numbers) can be entered.

Mode 3:

This method is a combination of methods 1 and 2. The machine blocks faxes from any num-

 

bers not registered in one-touch key or speed-dial. The machine also blocks faxes from con-

 

tacts registered as junk fax numbers.

OFF:

Junk faxes are not blocked.

 

 

Mode 1

 

 

 

Mode 2

 

 

 

Mode 3

 

 

 

 

 

 

 

 

 

 

 

 

Receive

 

 

Not

 

 

Not

 

 

 

 

 

receive

 

 

receive

 

 

 

 

 

 

 

 

 

 

 

Not Receive

 

 

Receive

 

Not receive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:Incoming numbers

 

 

 

 

 

 

 

:Numbers registered in one-touch key and speed-dial

 

 

 

 

 

:Numbers registered as junk fax numbers

 

 

 

 

 

 

 

 

 

 

 

 

Set block junk faxes

 

 

 

 

 

 

Default: OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

1Press SETTING.

2

Press [Fax Functions].

Settings

 

 

 

Select item to edit.

 

 

 

 

 

 

 

Enter

 

 

Speed Dial Group Name

Paper

Store Doc

 

 

Settings

Settings

 

 

Copy

Fax

Scanner

Management

 

 

Functions

Functions

Settings

 

 

User

Counter

 

 

 

 

Install

 

 

 

 

 

 

 

3-156FAX Chapter3 ● Communication Management