Section 700 - Operation Chapter 4. Key Telephone Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 4-39
2. Dial the telephone number.
The dialed number appears on the display.
3. Complete the call and replace the handset.
• The line LED changes from green to red and then goe s off.
• The time and date reappears on the display.
Related Programming
• FF1 (System): SMDR Display Start Timer for CO Calls
• FF5 (FF Keys): FF Key Assignments for Extensions
Considerations
• The duration of a call appears on the display while the call is in progress (if
enabled in programming).
• In CPC-A and CPC-B Versions prior to 3.1, the SMDR Display Start
Timer can be set to start 16 or 30 seconds after the last digit of the
telephone number is dialed.
In CPC-AII and CPC-B Version 3.01 or higher, the timer can be set to start
at 5, 16, or 30 seconds.
Conference Calls
(All Versions)
Description
Conference Calls allow an extension user to add a party to an existing
conversation.
Extension users can create the following types of Conference Calls:
• One outside line and two extensions
• Two outside lines and one extension
• One outside line and three extensions
• Two outside lines and two extensions