Chapter 4. Key Telephone Features Section 700 - Operation
4-94 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Speed Dial Linking
Description
You can automatically link together up to five SSD numbers in one Personal
Speed Dial Bin to handle telephone numbers longer than 16 characters.
Pressing the one Personal Speed Dial Key dials the entire number.
Alternatively, any combination of Personal Speed Dials and System Speed
Dials can be manually linked together by pressing the keys in the desired
sequence. This can be useful for prepending account codes or long distance
carrier access codes, etc.
For more information on programming Speed Dials, see “Speed Dialing” on
page 4-88.
Operation
To automatically link multiple System Speed Dials in a Personal
Speed Dial Key:
1. Determine the System Speed Dial bin numbers to be linked. These must
be preprogrammed by the telephone system administrator or the
attendant.
2. Pick up the receiver or press ON/OFF.
3. Press
PROG.
4. Press the PSD key to be programmed.
5. Press
AUTO.
6. Dial the SSD bin number. Remember that the trunk access may be
selected in the SSD by CONF (C) followed by the trunk access number
(9, 1-6 for trunk groups 89, 81-86).
7. Repeat steps 5 and 6 up to 4 more times for all additional SSDs to be
dialed.
8. Press
HOLD when finished.
The telephone will display “Stored PSDXXX.”