Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 5-23
3. Press
CONF when your call is answered.
Considerations
• Press the FLASH key to exit a Conference Call.
• The Hold feature cannot be use d during a three-party conference.
Dial “0” for Attendant
(All Versions)
Description
The Attendant can be called from any extension by pressing “0.”
If multiple attendants are assigned, dial “0” calls goes to Attendant “1” first.
If attendant “1” is busy, the call then goes to Attendant “2.” The call
continues to transfer to the next attendant in the attendant group, if necessary.
A maximum of four attendants can be assigned.
Operation
1. Lift the handset.
2. Press “0.”
Related Programming
• FF1 (System): Second Attendant Position
• FF1 (System): Third Attendant Position
• FF1 (System): Fourth Attendant Position
• FF1 (System): Attendant Transfer Extension