Panasonic 700 - page 192

Chapter 4. Key Telephone Features Section 700 - Operation
4-76 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
7. Press the
AUTO key.
8. Enter the Speed Dial number for the telephone number.
9. Repeat steps 7 and 8 for any additional Speed Dials to be chained.
10. Press the HOLD key.
11. Press the ON/OFF key.
The ON/OFF LED goes off.
To assign a DBS Feature Code to a One-Touch key:
1. Press the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the
PROG key.
3. Press the One-Touch key to be programmed.
4. Enter the feature code.
5. Press the
HOLD key.
6. Press the
ON/OFF key.
The ON/OFF LED goes off.
To assign an Outside Telephone Number to a One-Touch key:
1. Press the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Press the
PROG key.
3. Press the One-Touch key to be programmed.
4. Press
CONF followed by the Pooled Trunk Access code (9, 81-86).
5. If a pause is required, press the REDIAL key.
This inserts a pause between the access code and the telephone number.