Chapter 5. DSLT Features Section 700 - Operation
5-16 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Call Transfer
(All Versions)
The DBS provides two call transfer methods: blind transfer and screened
transfer.
Blind Transfer
Description
Blind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
1. Press the
HOLD key to place the call on hold.
2. Dial the extension number to which the call is to be transferred.
3. Replace the handset before the other party answers.
• You can also replace the handset after the third party answers.
• The third party need only pick up the handset to speak to the outside
line.
Related Programming
• FF1 (System): Onhook (Automatic) Transfer
• FF1 (System): Recall Timer for Extension-Transferred CO Calls
• FF1 (System): Recall Timer for Attendant-Transferred CO Calls
Considerations
• For users to transfer calls by pressing HOLD, dialing an extension, and
going onhook, the Onhook Transfer feature must be enabled.
• You cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
• You can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension it
is transferred to.