Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page A-29
Programming See Section 400 - Programming (Appendix C) for more detailed
programming information.
SMDR Printing Mode 1: Outbound and Inbound
Description SMDR data sent to Serial Port 1 can now include Network Calls also.
Programming See Section 400 - Programming (Appendix C) for more detailed
programming information.
T1 Trunk Type
Description The setting for T1 Trunk Type now includes a parameter for E&M
Network.
Programming See Section 400 - Programming (Appendix C) for more detailed
programming information.
Extension Numbers
Description The address for extension number assignments has been modified to allow
for 4-digit extensions.
Forced LCR/NRS
Description The address for Forced Least Cost Routing has been modified to include
Network Node Route Selection (NRS).
Programming See Section 400 - Programming (Appendix C) for more detailed
programming information.
Other Changes to Programming Addresses
Flexible Function Screen Soft-Key Assignments (FF1 2# 7# 25-39# (1-10)# (xxxxxxxx)#)
and FF Key Assignments have been modified to allow up to 8-digit entries.