Appendix I. CPC-EX 2.3 Feature Update Section 700-Operation
Page I-16 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
6. When Password> is displayed, type the 4-digit remote or private
password.
7. After the DBS responds with REMT>, type P and then press Enter.
8. Follow the directions on the screen to access the desired program. (See
“Terminal Programming Commands”.)
ISDN Programming Flexibility
Description
The previous versions did not allow the programming flexibility to
accommodate certain central office ISDN configurations. This enhancement
allows the flexibility in programming to set the DBS parameters to match
certain central office provisioning.
Programming
Programming See Section 400 - Programming (Appendix K) for more detailed
programming information.
Operation
N/A
Notes
UNLESS STATED ALL OTHER DEFAULT VALUES ARE CORRECT.
Typical Central Office Configurations
Lucent (AT&T) 4ESS
• CO Type (0) 4ESS
• NSF- None (0) or MegaCom (2) - D epends on service requested from CO.
• ISDN International Code Deduct 0 1 1
- Set to (1) to deduct 0 1 1 from the CO Setup message.
• ISDN Long Distance 1 Code Deduction
• Set to (1) to deduct 1 from the CO Setup message.