Chapter 4. Key Telephone Features Section 700 - Operation
4-58 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
4. Replace the handset.
To make an Tone Call:
1. Pick up the handset.
The phone issues intercom dial tone.
Note: If you are calling from an extension programmed for prime line
preference, press the FF key programmed for intercom operation.
2. Dial the extension number.
3. If the system default is voice calling, dial “1.”
• “Call-EXT XXX” (where “XXX ” is the extension) appears on the
display. If the extension name has been stored, that name appears,
rather than the extension number.
• The called extension rings and the EXT LED flashes.
• When the call is answered, Talk-EXT XXX” (where “XXX” is the
extension) appears on the display. If the extension name has been
stored, that name appears on the display after “Talk” instead of “-EXT
XXX.”
4. Complete the call and replace the handset.
The EXT LED goes off.
To transfer a call using Tone Calling:
1. Press the
HOLD key.
• The EXT LED flashes.
• “Hold-EXT XXX” (wher e “XXX” is the extension) appears on the
display.
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is voice calling, dial “1.”
“Call-EXT XXX” (where “XXX” is the extension) appears on the
display.
4. Replace the handset.