Chapter 4. Key Telephone Features Section 700 - Operation
4-82 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
The LED of the ML or MCO key goes off.
To select a Pooled Trunk group that is not assigned to an FF key:
1. Press the
ON/OFF key.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
2. Enter the desired group number (81-86, 9).
• The phone issues outside dial tone.
• “CO TALK #XX” (Where “XX” is the line number) appears on the
display.
3. Dial the telephone number.
The number appears on the display.
4. Complete the call and replace the handset.
Related Programming
• FF1 (System): Least Cost Routing (LCR) Access
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF2 (Trunks): Pooled Trunk Access for Group “9”
• FF3 (Extension): Forced Least Cost Routing
• FF5 (Keys): FF Key Assignment
• FF8 (LCR) LCR Settings (all)
Considerations
• The LED of the ML or MCO key lights red and the phone issues busy tone
when all lines in the same group are busy. (Those lines cannot be
accessed.)